123 Block/Angle
123 Block/Angle
Published 2020-01-25T23:00:21+00:00
This is three different objects inspired by a 123 block. I do a lot of foamboard rc airplane builds and I never have a good square tool to help me hold pieces at right angles while the hot glue dries. I initially decided to make a small right angle, or carpenter square, to help me but I decided to try a simple block that was 1"x2"x3". I decided to make it more of a frame than a block becuase I wanted to save matearial and it would make pressing it against whatever I was trying to hold at a right angle easier.
The first object is a 123 block frame with rounded corners. The last two are right angle/square tools. One of them has a scale on one of the 2"x3" sides that mark 1/2" intervals.
As an added bonus, these objects can also help you calibrate your axes.
All three of these were printed on the Prusa i3 Mk3S in PLA at 0.2mm layer height with 10% infill.
The right angle without the scale was printed with the 2"x1" face on the build plate. The other two were printed with the 2"x3" face on the build plate.
Date de publication | 25/01/2020 |
Sans support | YES |