Raspberry Pi Camera part for Drogerdy Tank Bot
Raspberry Pi Camera part for Drogerdy Tank Bot
Published 2015-12-07T11:36:31+00:00
This is a replacement body part for the Drogerdy Tankbot that allows it to integrate a Raspberry Pi Camera straight into the body.
Careful design of the internal electronics and you could make this a streamlined mobile surveillance camera!
ADDED: Internal Component Rack
Video: https://www.youtube.com/watch?v=6MOlFp5fiKM
Instructions
Print out from the Main Drogerdy Files at https://www.myminifactory.com/object/drogerdy-raspberry-pi-controlled-tank-bot-16328
1 x Body Part
2 x inner frames
4 x outer track frames
4 x inner track frames
52 x track
The print out the camera body part from this page.
Glue together putting the motors in first before you glue the body parts in.
These motors : https://solarbotics.com/product/gm3/ or similar from China (yellow on ebay for $2 each!)
Screw the camera in.
The other components are up to you .... but I am using an A+ and the items as per the links below and have designed my rack accordingly.
Use 2mm stainless steel pins to join the tracks.
I used this power converter:
I used this motor shield:
Date de publication | 07/12/2015 |