2 inch Action Figure for Heavy Walkers
2 inch Action Figure for Heavy Walkers
3D
Published 2021-02-26T13:07:06+00:00 • Remixé depuis Heavy Construction Walker (Action Figure)
Printable Tiny Action Figure
Assembly is required.
Assemble instruction is in my youtube channel
*"Right_Arm2_No support.stl" and "Left_Arm2_No support.stl" are must print without supports.
*No extra parts needed, which are can't make with 3D printer such as metallic springs, bolts and etc.
*The parts are designed and tested to fit each other, however the tolerance is depends on a 3d-printer's condition.
Please remove the supports completely. May need a sandpaper or cutter while assemble the parts.
Use a raw 1.75mm filament and super glue while assemble the parts.
*This Action figure is a pilot of Heavy Walkers.
1. Heavy Construction Walker ( https://www.myminifactory.com/object/3d-print-90228 )
2. Heavy Gun Walker ( https://cults3d.com/en/3d-model/gadget/heavy-gun-walker )
3. Heavy Artillery Walker ( https://cults3d.com/en/3d-model/gadget/heavy-artillery-walker-action-figure )
*The hands are compatible with Lego parts.
The object tested by FDM 3d printer with PLA and ABS filament.
Layer height:
0.18mm
Shell count: 3
Fill density: 100%
Supports:
No (Visor_Gold_No Support, Right_Arm2_Gray_No Support, Left_Arm2_Gray_No Support.stl)
Yes (Rest of all)
Time to do: about 80 - 100 minutes
Technology: FDM
Material: PLA or ABS
Dimensions: about 25mm x 49mm x 14mm
Material Quantity: about 7g
| Date de publication | 26/02/2021 |
| Durée d’impression | 80 - 100 minutes |
| Quantité de filament | about 7g |
| Dimensions | 25mm x 49mm x 14mm |