Loading
Deadpool Bust (Classic Edition)
Published 2018-05-11T16:12:32+00:00
Deadpool Bust (Classic Edition)
Published 2018-05-11T16:12:32+00:00
✔ For more sculpts like this, take a look at my Patreon.
Note: An updated version of this model exists that does not require supports: Deadpool Bust (Remastered Supportless Edition).
The Merc with a Mouth. This is my own take on this quirky and absolutely batshit crazy anti-hero. Unfortunately there's no Ryan Reynolds hiding beneath that mask, it's just Wade Wilson, but I think that's good enough!
This is fan art, provided for free, and I fully acknowledge the Deadpool likeness is the property of Marvel Entertainment, LLC (The Walt Disney Company).
I printed this on my CR-10S using some regular PLA, and the following settings:
Layer height: 0.12mm
Nozzle: 0.4mm
Perimeter: 0.8mm
Speed: 30mm/s
Top/bottom # layers: 6
Print time: Roughly 26 hours
You want to use supports for this one. Make sure the supports are automatically generated correctly as the ones my Simplify3D generated for me weren't very good, and I had to adjust them manually.
Date de publication | 11/05/2018 |
Dimensions | X:154mm x Y:81mm x Z:200mm |
Share 3D Post on Facebook
Tnx for this amazing design
Here’s my mini test print, full size going now...
Hiya David, bit of a small question... Your awesome job on the superman bust with the Rubnbuff, which I’ve now bought myself as you can see from my mini. Was just wondering, what cloth did you use.? I’ve tried a number of things from finger, to towels. Just never can get the right one to get the finish you get....also....just off the bed..3 days.... Just one tiny blemish on the head, think it was my support caused it, but I can live with it, as the rest is great.
Here’s my final model..”
Here mine, resin print 15cm (moai)
Printed on a Anycubic Photon
Nice bust, ty for sharing your great job.
We printed this on the Tyler Public Library's PolyPrinter 229.
I really love your models. Thank you for sharing! This is made with anet a8, 3 pieces at 125%. Total 25 cm high.
Made on my XYZ Davinci jr pro 2 1.0, copper hatchbox filament. With acrylic paints and clearcoat.
thanks for sharing! great model
prints good and supports are not to bad.
Great model. Thanks for sharing. Though I will have to print again at a better resolution :) Printed on Ender 3
Awesome file ! I add some problems with the arms, maybe my fault, there were not enough support generated. Anyway thank you !
120 mm tall, 0.1 layer height a really really beautifull model. I already printed captain america and go for the other. Thanks a lot hope to see you next model very quickly
Sweet model! Thx for a great job man!
Awesome model - Here`s my first attempt at painting by brush
0.06mm layer height, white PLA, then a coat of matte black spray, then finally dry brush silver.
First printed model. printed @50% Cool details. I really like the depth achieved in areas like behind the ammo straps. Finished with Bondo glaze, Krylon filler primer then acrylics, Thanks for uploading this. I tried the eyes a little different to give them a different look.
Painted with metallic green and used black wash
0.2 layer and painted with acrylics.
Fillamentum Purple Red PLA printed at .2mm layer at 205C. Such a clean model. Thanks!
I love this bust. It was a pleasure to paint. I added the name on the front of the base. The name davidostman.com still on the back incase anyone asks were I got it ;)
Awesome model. Love your work mate.
Where the #$@& are my arms!?
AwsoAwe print!
Printed on the Uniz Slash plus UDP. The the layer height is 0.1mm but still looks great.
Makergeeks Racy Red PLA Printed with supports at 10% infill and 2 perimeters
Printing time: 18h Layer height: 0,12mm
Awesome David TY ! 0.1 print, support under the chin.
nice model
Thanks for sharing
me encanta ..aqui probando distintas cosas en mi ender 3 pro
Deadpool .2 layers. 18 hours. Printed on Ender 5 in Creality RED PLA.
Printed a yellow one on the Ender 5
thank you so much for the amazing model
Thanks for your fucking awesome 3d model
Beautiful print, no issues at all and overall is just amazing
Creality Ender 3 0,1mm 45mm/s 205°c / 60°c PLA Silver 1,75 Giantarm Sans support 32H d'impression Hauteur 20cm
This model is being used in an advert on facebook
My 2nd attempt at painting, bleech.
Thank you for the great print
My buddy printed this one and asked my 13yo daughter to paint it for him. Turned out nice. Thanks for the model! Now she she paint my 2 prints too :P
Very nice model!
Merci !
I love your models. Thank you very much for share.
Printed on a Voxelab Proxima Monoscreen resin printer
Encore un fichier incroyable ! Merci beaucoup de nous partager ça :).Je l'ai imprimé avec du PLA Rouge Brillant et peins après ! Si vous voulez découvrir mes impressions, vous pouvez aller voir mon Insta : guigeek_
Si vous voulez découvrir mes impressions, vous pouvez aller voir mon Insta : guigeek_
Great print. First ever paint job.
First time painter. Love the model.
Hi, just like to say massive thanks for these superb designs, i'm brand new to printing/painting so hope i've done them justice, constructive criticism welcome, many thanks John
Awesome model, I really had fun in painting it. Printed on Elegoo Mars 2 pro, painted with Handbrushes and The Army Painter Warpaints color range. Tnx to Eastman for the model and for give it freely away. Kudos.
Hey! Painted bust of this dude! Awesome sculpt! More miniature painted by me - https://www.instagram.com/we1tenwanderer/ =)
Resin: Elegoo standard UV resin Gray Normal exposure time: 3 sec Layer thickness: 0.5mm Bottom layers: 6 Bottom exposure time: 40 sec
Imprimé en petit avec l'imprimante 3D Weedo Tina2
Hey! Painted another bust of this guy! At this time in wolverine colors! More miniature painted by me - instagram.com/we1tenwanderer =)
Weathered Deadpool. 50% of original scale. Really like this one
This was a fun very long print. Nothing was painted it is a multi color print!
Half gold silk PLA, and half orange TPU, wanted to see the detail I could print with both, so this was a test worked great, also shrank it by 25%.
Awesome model.