Airsoft Mock Suppressor 14mm CCW
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Airsoft Mock Suppressor 14mm CCW
3D
With this really working suppressor you can easily make your airsoft replica a lot quieter. The connection is a 14 mm left-hand thread with a 1 mm thread (for this you need a special tap). You can easily print this suppressor with any FDM printer without the use of supports.
Tested on my Krytac PDW and Scorpion EVO 3 A1 replicas and clearly working, both replicas are a lot quieter with this suppressor.
You do not need to use a sponge or cloth for this suppressor, the noise is removed by special 'chambers' in the suppressor.
Only suitable for 6mm Airsoft replicas
Print this object in a strong material, like Colorfabb NGEN or ABS. This because on the Airsoft Playfield, things might get rough.
I printed mine with NGEN and proofed to be strong enough to survive many games.
| Status | Rejeté |
| Durée d’impression | 5 - 7 minutes |
| Sans support | YES |