Alpha keyboard case (PyrooL 28-key PCB)
Alpha keyboard case (PyrooL 28-key PCB)
3D
Published 2019-10-29T00:22:56+00:00
Hello!
This case is designed for Alpha keyboard PCB by PyrooL.
His project can be found on github here.
PCB is mounted in the case from the top and secured by:
- 3x washers (either your own or printed from the file included, I didn't have any)
- 3x M2.5x12mm screws from the top
- 3x M2.5 nuts on the bottom
If any of the posts for screws can't fit into your PCB, let me know! I'll upload a version with higher clearence for your printer! :) Also, the reset switch hole is added as an after thought so if it doesn't fit, let me know :)
I've printed the case from two filaments in one print. I've paused it after it finished bottom layers and changed the filament from transparent to black so RGB LED strip, I've installed on the bottom, would shine through :)
| Date de publication | 29/10/2019 |