AMPLIFIER SMARTPHONE & IPHONE
AMPLIFIER SMARTPHONE & IPHONE
3D
Published 2018-01-29T13:10:10+00:00
I used the cans to make an excellent sound amplifier for my smarphone and iphone.
There are three files for the design. Printed on pla
Amplifier must be printed with supports, I use those of the priest and they are very easy to remove.
The matrix piece to mark the boats and drill them, does not need supports.
The covers do not need supports either, but it is convenient to print them because when removing the upper part of the can, it is very dangerous, they simply press.
The rest you can see in the photos and in the video that I will try to send.
You the link to the video where you can check that it works
He utilizado las latas para fabricarme un excelente amplificador de sonido para mi smarphone y iphone.
Hay tres archivos para el diseño. Imprimidos en pla
Amplificador debe imprimirse con soportes, yo utilice los del cura y son muy faciles de quitar .
La pieza matriz para marcar los botes y perforarlos, no necesita soportes.
Las tapas tampoco necesitan soportes, pero es conveniente imprimirlas porque al quitarle la parte superior a la lata, se queda muy peligrosa, van simplemente a presión.
El resto lo podeis ver en las fotos y en el video que voy a intentar mandar.
El enlace al video donde puedes comprobar que funciona
https://youtu.be/YSGKYR8jXSU.
I used Anet A8
The printing times and other features you have in the screenshots that I leave in the photos.
If you want to shorten the printing time of the amplifier you can delete the letters, in a simple way with the Tinkecard.
| Date de publication | 29/01/2018 |
| Durée d’impression | 554 - 660 minutes |
| Quantité de filament | 125 g |
| Dimensions | 130x36x74; 60x60x120; 38x36x60 mm |
| Technologie | FDM |
| Complexité | Easy |
| Sans support | YES |