Anglo Saxon Tomb Cover at The Lincoln Collection, United Kingdom
Anglo Saxon Tomb Cover at The Lincoln Collection, United Kingdom
3D
Published 2016-05-16T15:44:00+00:00
This object is part of "Scan The World". Scan the World is a non-profit initiative introduced by MyMiniFactory, through which we are creating a digital archive of fully 3D printable sculptures, artworks and landmarks from across the globe for the public to access for free. Scan the World is an open source, community effort, if you have interesting items around you and would like to contribute, email stw@myminifactory.com to find out how you can help.
Scanned : Photogrammetry (Processed using Agisoft PhotoScan)
The object is rather thin so a thicker base layer is recommended to keep the print together when pulling it off the bed. I would also recommend a high infill percentage around 30 percent. This is to help support all of the irregular shapes that start in the middle of the object. There are many low slopes so you may need to use a .1mm layer height or smaller if you can to help keep the amount of stepping to a minimum.
| Date de publication | 16/05/2016 |
| Durée d’impression | 200 - 250 minutes |
| Quantité de filament | 23 grams |
| Dimensions | 130mm x 62.36mm x 5.09 mm |
| Technologie | FDM |
| Sans support | YES |
| Titre | Anglo Saxon Tomb Cover |
| Dimension | Height, 88cm x Length, 37cm |
| Accession | x |
| Période | Anglo Saxon |
| Medium | Limestone |
| Credit | Location, St. Mary Le Wigford, Lincoln |
| Localisation | The Lincoln Collection |
