Articulated Turtle
Articulated Turtle
3D
Published 2015-04-24T16:02:56+00:00
I really like to create movable toys that you can print pre-assembled, so I made a little friend for the Ape figurine.
If you like me to spend more time adding animals to the zoo, please consider supporting me by buying my models for cheap on http://toyfabb.com :o)
*Update: Version 2.0 has more support included that will make it stick better to the platform and will help getting a smoother print.
Print at 0.2 mm layer height, with 10% infill. This uses 17 g of filament and takes 4 hours and 46 minutes. It's a easy print and doesn't need support anymore! I updated the Turtle with some minor changes and also included a small pillar under the neck that you have to break or cut off after printing, this might be a bit tricky, let me know please. I would also advise to use a brim to keep the different parts better in place while printing. I just printed one with these settings in 90 minutes: Print speed 50mm/s Bottom, outer wall and top 0.5mm Layer height 0.15mm Infill 25% with a speed of 75 mm/s If you want a really nice print, just lower the layer height.
| Date de publication | 24/04/2015 |
| Durée d’impression | 286 - 296 minutes |
| Quantité de filament | 17 g |
| Dimensions | 39 mm x 54 mm x 20 mm |
| Complexité | Easy |
