Boxing Santa biped robot
Boxing Santa biped robot
3D
Published 2019-02-14T16:25:54+00:00
I couldn't find a santa robot online shopping for christmas so I decided to build one see Instructables website BOXING SANTA BIPED ROBOT for more details and assembley instructions.
The parts have been arranged to print on a build surface of 150mm x150mm.
Print the Face and Forearms file in white the Body ,Clips and battery, Arms feet hat , Back cover files in red for the best Santa look.
Ideally it is best to print with a layer height of .2mm but .3mm works as well.
No supports are required for this print.
I recommend printing with a 5mm wide brim of one layer height spaced .1mm from the parts to ensure that the parts stick correctly to the print bed whilst printing, Infill 15%.
Total print time 10 to 15h.
| Date de publication | 14/02/2019 |
| Durée d’impression | 600 - 900 minutes |
| Quantité de filament | 150g |
| Dimensions | 150x150x70 |
| Sans support | YES |