Build masks Kit with not having to Sew, include Nose clip
Build masks Kit with not having to Sew, include Nose clip
3D
Published 2020-03-30T09:50:13+00:00
This kit allows building a mask with the right fabric without the need to sew. It has a nose clip that can be used with a normal mask also to fit the nose. It has a clip system with a handle that allows you to put fabric around the cylinder and the clip and force the cylinder inside the clip this way you have the fabric strongly attached and with a string, you can finish your mask. You can dismount and disinfect pieces and replace the fabric mask and continue. The cylinder is a 8 mm diameter also you have a 7mm in case your fabric is too thick but is easy to scale in your slicer to less diameter, you can also make large cylinders in the slicer. Also have made 2 clips to allow another type of attaching or make multiple layers mask. I have read that vacuum cleaner bags are the best household materials. Keep Safe!!
Everything can be print without any type of support, are small pieces better 100% infill except the cylinder can be with infill, my suggestion is to print the cylinder in horizontal this way the layer dents will give better grip, no support needed anyway.
| Date de publication | 30/03/2020 |
| Sans support | YES |