Capsule Corp - Small Ship (Dragon Ball Z)
Capsule Corp - Small Ship (Dragon Ball Z)
Published 2019-08-06T08:03:41+00:00
Growing up one of the first anime shows I was introduced to was Dragon Ball Z, and one of the things that was interesting to me was the futuristic style of the homes and spaceships designed by the Capsule Corp Corp.
This figure was designed with the Capsule Corp small spaceship in mind, and can be placed on your desk for work, your dorm, your work space at home, or even in your child's room! It's really fun if you print it large enough to put an LED in the ship to glow at night!
Print Dimensions should be no smaller than :
60mm x 65.88mm x 68.58mm
anything lower may start to have print issues.
Print Speed : 50mm/s
Filament used : PLA
Print Temp : 218C
Bed Temp : 60C (may be unnecessary)
Supports : Enabled (Although Many were blocked to make post processing easier)
Support Angle : 75 degrees
Support Style : Zig Zag
Infill : 10%
NOTE: As shown in my attached images, my supports were blocked for the majority of the print, I really only needed them for the outer portions of the legs and the ladder that extends at a slight curve from the ship just above the floor. THIS IS NECESSARY OR THE DOOR PORTION WILL FAIL.
Date de publication | 06/08/2019 |
Dimensions | 100x109.8x114.3 |