Card deck shuffler V2
Card deck shuffler V2
3D
Published 2018-08-10T11:05:51+00:00
This card shuffler is designed for a set of official poker card size cards (smaller size cards would work too).
This design can be printed on FFF & SLA style printers with a build volume of 130 x 130 x 130 mm.
UPDATE: August-21-2017
After receiving feedback from a couple testers, I made a version 2. The shuffler now has:
Increased max card size
A feet under the card holder for stability
Clips to hold the roller in place (Some people had it working without the clips)
However, there are still some things left to do:
Make a better connection between the stops and the bottoms
I Love to hear feedback from you!
UPDATE: October-29-2018
I`ve also uploaded the .STP files for those who want to edit the shuffler.
UPDATE: July-5-2017
I have been improving the design, I decreased the angle of the rollers and adjusted some tolerances.
I would love to have it tested by someone other than me. If you would like to help me, please leave a message!
To assemble the shuffler you will need:
1x = M4x16 bolt
1x = M4x40 bolt
2x = M4 nuts
4x = O-ring (you can also use a rubber band, or a hot glue gun) for gripping to the 3d printed surface
| Date de publication | 10/08/2018 |
| Technologie | FDM |
| Complexité | Difficult |
Just completed the entire print and now its ready to be used. Used PLA, fill at 40% and the rest were standard settings though I did have to split the rollers and the handle into separate blocks using Blender