cbd-3d MOSFET enclosure
cbd-3d MOSFET enclosure
3D
Published 2018-03-06T18:23:57+00:00
Since the controller board that comes with the Tevo Tarantula is apparently not designed to handle the current necessary for heating the bed to print ABS without catching fire, a MOSFET expansion board is needed. Being a technician, I could have easily built one, but when you can get one on Amazon for eleven bucks - https://www.amazon.com/gp/product/B01MY50JL3 - why bother? It does need an enclosure, however.
This case is designed to be used with the MOSFET controller boards marked "www.cbd-3d.com V1.3". A 30mm fan is mounted behind the heatsink to aid in cooling. I suggest orienting the fan so that air is pulled through the box and out the fan, thereby sucking heat out while bringing cool air in the front grill. The control wires are brought out the front through the horizontal slit.
While designing the box, I modeled the board itself just for the hell of it. I haven't printed the board model, but I am including it in case you want to. If you do decide to print the model, please post photos so we can see how it comes out.
Printer:
Tevo Tarantula
| Date de publication | 06/03/2018 |
| Technologie | FDM |
| Complexité | Easy |