Cracked Flower pot
Cracked Flower pot
3D
Published 2015-07-07T10:04:16+00:00
A pot that's been split in to pieces by the roots. Giving your little sprout a pretty beefy look. Almost like it is going to take over the world very soon.
Great for painting! Giving it more of a realistic look!
recommended slicing software: Cura HOW IT'S MADE: Designed this cracked flower pot using multiple 3d programs: In 3ds Max I modeled the basic forms like the pieces of the pot, the forming of the roots around the pieces and a cell so that everything will stay together and so the pot can still hold water. To make sure the pieces of the pot and the shell were solid I used Dynamesh in Zbrush. The details on the roots I did by sculpting in Mudbox. After that I brought the detailed roots back to max together with the pot from Zbrush so I could export it for Slicing in Cura. The Print that is showed in the pictures was printed on a Ultimaker2 at 0.2mm layerhight ABS. After around 13 hours the print was done. Before painting I done some sanding and used XTC-3D to smooth out the seems. I could also use accitone but that was more unstable and tricky to get a good result. Painting i did in about 3 staps: First I painted an base color with airbrush, in this case i used gray. The next layer was the flat coloring with airbrush of pot and the roots with paint a brush. At last I used lightly the airbrush for accentuating the details and a little bit of ambient occlusion.
| Date de publication | 07/07/2015 |
| Quantité de filament | 190 grams |
| Dimensions | 175mm x 160mm x 125mm |
| Complexité | Medium |
| Sans support | YES |
