Start outfitting your figures with a proper shop with this drill press. Everything you need to make either a free-standing or a bench-mounted version is included.

Print one of everything, except the axels- for those, just choose either axle_full (for the free-standing version) or axle_short (for the tabletop). Alternatively, print one of the pre-plated versions.

Post-Printing

All you'll need to assemble the model is a little bit of superglue, and (depending on your printer) maybe a knife to trim down the thickness of the axel.

I recommend the following order:

1. glue headTop to headBot to make the motor housing assembly
2. glue your chosen axel into the base
3. slide the plate onto the axel, a little past where you actually want it to be
4. add glue around the axel at the desired location for the plate
   move the plate up and onto the glue
5. while you're letting the axel/base/plate assembly dry, add a drop or two of glue to the handle and press it into the hole in headBot
6. glue the completed motor housing assembly onto the top of the axle