Felix Cat Eye
Felix Cat Eye
Published 2014-04-11T19:09:31+00:00
It's so cute!! That's what I said when felix came out of the printer! A very cute minimalistic cat lamp shape, he is a lazy cat but it can give you some company while you are reading your books.
The model consist of four parts: Tail, body, head and glasses.
-The Tail: Print it in vertical orientation, at a medium resolution (obviously highest resolution is better) we recommend a medium support and maximum infill setting.
-Body: You can print it on a 12.5 x 12.5 print platform, print it at medium resolution (higher resolutions are recommended) . Print this part with the legs touching the print tray.
-Head: Print it vertically (not horizontally) medium resolution and medium support are recommended.
-Glasses: Print this part in the vertical orientation at a medium resolution with a medium support setting.
Once that you have got all the parts, clean them properly, and add the cable, switch the plug, and the lamp holder http://www.ebay.co.uk/itm/Brass-Plated-Lamp-Bulb-Holder-10mm-Entry-Small-Edison-Screw-SES-E14-Earthed-/130923257797.
Enjoy !
Date de publication | 11/04/2014 |
Dimensions | 21x10x23cm |
Technologie | FDM |
Complexité | Medium |