FidgSpin
FidgSpin
Published 2017-08-24T08:57:16+00:00
Meet FidgSpin, A cute firendly Robot that can transform into a cubed shaped Fidget Spinner.
The Original design for this robot came from azraelho on Thingaverse. I wasn't happy with the way the 2 body halfs joined together so i beefed them up a bit. I then had the idea to make him a fidget spinner. So i added slots for 608 bearings to be pressed into the arms. Dispite the weight of the cube not being evenly distributed this little giy spins pretty well.
The added dimension on the arms for the bearings does a great job of locking the whole guy together so he doesn't fly open as you spin him.
For assembly you will have to glue the body together. Glue on the pins and the tabs is all you need. You will need to clamp him down as the glue dries. I've included a picture of how i clamped him. I uses a couple of 2x2 lego bricks on his crotch to get a good grip with the clamps.
UPDATE 8/31/17: Fixed an issue with the left arm. The mesh didn't want to act right. So i've updated the Left arm and the full layout.
All parts should be oriented correctly for printing. I've also included an STL with all the parts ready to print. You will need to use supports to print this project.
Date de publication | 24/08/2017 |
Quantité de filament | 68 Grams |
Dimensions | 50*50*50 |
Complexité | Medium |