Firecracker Cannon
Firecracker Cannon
3D
Published 2020-09-14T17:59:20+00:00
! Use at your own risk !
! No liability for personal injury or property damage !
Firecracker Cannon
This cannon is made for 6,5mm diameter firecrackers and can shoot airsoft BB´s.
There is a nice easy system to get the fuse inside the ignition hole. Only push the firecracker trough the big hole of the barrel and the fuse is coming out of the small hole in the back. ( there is a hopper system in the back of the barrel)
The walls are very thick, but safety distance and safety equipment should be worn to prevent injury.
Have some fun with this Thing!
To see this Thing in action, just watch this: https://youtu.be/7SqrMBzAZ1A
! Use at your own risk !
! No liability for personal injury or property damage !
Resulution: 0.1 mm
Infill (PLA): 90% - 100% for the barrel
50% for the side panels
100% for the stamp
| Date de publication | 14/09/2020 |
| Durée d’impression | 180 - 400 minutes |
| Sans support | YES |