Freely adjustable phone stand
Freely adjustable phone stand
3D
Published 2020-05-18T11:45:49+00:00
Welcome to my design!
This is a massive phone / tablet holder, witch has freely adjustable angle from 95° to 175°. It has nice, elegant design, and it is pretty compact, as You can see in the pictures. Compatible with phones / tablets thinner than 12.5 mm.
The mechanism of the phone holder is based on tight tolerances.
You can print it without any supports. For printing I recommend to use PLA, or some other stiff material. When printed out, for assembly You need a press or rubber mallet / a small hammer, and You have to press the three parts together, as You can see in the pictures. For more informations see the printing details.
I hope You enjoy my design :)
This phone / tablet holder is printable without supports.
For printing use PLA.
I recommend You to use 3 perimeters.
Recommended layer hight is 0.2mm, but You can also use finer settings.
Recommended infill is 20-30%.
For one stand You have to print these files:
holder_leg_1.stl
holder_leg_2_pl.stl OR holder_leg_clean.stl
stand.stl
| Date de publication | 18/05/2020 |
| Quantité de filament | 44g |
| Dimensions | 104mm x 70mm x 20mm |
| Sans support | YES |