Geetech I3W original spool holder modification
Geetech I3W original spool holder modification
3D
Published 2019-08-20T09:35:11+00:00
I have a Geeetech printer, heavily modified, but I always used the original spool holder as I mostly used to print with the same color till the end of the spool. Now I find myself changing often from PLA to PTU and the old way I had it setup became a bit annoying so I came up with this modification that allows me to quickly change the spool without having to release the clamps that held the axle in place.
My Geeetech is an I3W, plywood version.
The modification is very simple, it consists of two cores that fit in the standard holder's bigger holes, fixed with 4 little tapping screws and 4 right angle plates to keep the vertical plates "vertical" (the original holder is a good support but long from having squared sides and bottom.
I cut the axle for the spool at the exact measure and it just fits perfectly in and out without any extra clamps.
My axle is 8mm in diameter but you can choose a different size in the customizer.
----------------------------------------------------------------------------------------------------
I created these eBay links where you can find components, filaments and spare parts at the best prices. These are just links to eBay and Aliexpress items, where I normally buy spare parts and materials for my printer and projects. Buying something throught these links will support a little bit these projects.
PCB perforated boards - Resistors eBay - Capacitors eBay - Diodes eBay - led - Wire terminals eBay - Arduino and modules eBay - Raspberry and modules
Prototype PCB board Aliexpress - Resistors Aliexpress - Capacitors Aliexpress - Diodes and LED Aliexpress - Arduino and modules Aliexpress - Raspberry and modules Aliexpress
PLA Filament - eBay - ABS Filament - eBay - TPU Filament - eBay - PET Filament - eBay
Heat blocks and heaters - Aliexpress
Standard nozzles - eBay - Standard nozzles Aliexpress
Volcano nozzles - eBay - Volcano nozzles - Aliexpress
GT2 pulleys - eBay - GT2 pulleys - Aliexpress
GT2 belts - eBay - GT2 belts - Aliexpress
Linear bearings LM series - eBay - Linear bearings LM series - Aliexpress
NEMA 17 step motors - eBay - NEMA 17 step motors - Aliexpress
100$-200$ 3D printers - eBay - 100$-200$ 3D printers - Aliexpress
200$-300$ 3D printers - eBay - 200$-300$ 3D printers - Aliexpress
300$-500$ 3D printers - eBay - 300$-500$ 3D printers - Aliexpress
500$-1000$ 3D printers - eBay - 500$-1000$ 3D printers - Aliexpress
1000$-2000$ 3D printers - eBay - 1000$-2000$ 3D printers - Aliexpress
2000$ - 5000$ 3D printers - eBay - 2000$-5000$ 3D printers - Aliexpress
Filament extruding machine - eBay -
Filament extruding machine - Aliexpress
| Date de publication | 20/08/2019 |
| Sans support | YES |
