Glasses holder
Glasses holder
3D
Published 2020-07-14T16:54:08+00:00
This is a holder for your glasses which you can put next to your bed to keep everything nice and organized :)
this model consists of 3 parts, the base and 2 different trays. (you can choose the combination of trays but i suggest you put the big one on the bottom an the small one on top).
these can be printed in PLA, ASA, PETG,.. any color u like :)
All modifier meshes are included an can be used in prusa slicer.
Printing the Base:
you can use the modifier "MOD_BASE" to make tho bottom half a bit heavier by adding more infill. i used 15 % overall an about 30% for the bottom half at 0.2mm layer height.
its important to print it in the orientations as shown in the pictures.
printing trays:
These you can print in the normal orientation. You can add the modifier meshes and make te bottom and top solid layers 0 so you can see the infill. you can change the infill type en percentage as you like! Use the option "support from build plate only".
once you printed everything you can use a bit of glue to attach the trays to the base.
DOWNLOAD INSTRUCTIONS IN PDF
| Date de publication | 14/07/2020 |