Half an Pine cone (Photogrammetry)
4,446
views
158
downloads
1
collection
Community Prints
Add your picture
Soyez le premier à partager une photo de l'impression de cet objet
1 comments
Loading comments... 
Half an Pine cone (Photogrammetry)
3D
Published 2017-11-30T12:27:24+00:00
8
1
Add to Collection
Description
Scanned an pinecone I've picked up from a garden in France.
Sliced into half for easy printing on the base. Can be use to stick on walls for Decor if necessary. Creativity is up to you guys!
The model itself is rather small, size it up to 300-400% for a real-life size
This model has 100,000+ Mesh Faces, recommended to slow your printer speed to get the most detail out of it (perhaps 40mm-60mm/s for infills and perimeters)
Go high layer resolution on this one. 0.1mm Layer height will do the trick!
Détail de l'impression
Print with flat side down. Use support. NOTE: This object is very small and the print specs are for it scaled up 500%.
Technical Information
| Date de publication | 30/11/2017 |
| Durée d’impression | 177 - 177 minutes |
| Quantité de filament | 27g |
| Dimensions | 70.0mm x 73.8mm x 43.8mm |
| Technologie | FDM |
| Complexité | Medium |
More Information
Object Parts
