Hand drill for drill bit with hex shank
Hand drill for drill bit with hex shank
3D
Published 2018-04-16T16:01:19+00:00
Hand drill made with Tinkercad, copy modify and share :) :
https://www.tinkercad.com/things/fJrZFfY4l32-hand-drill
The size of the hex shank here is 6.5x7.5mm , if you need to modify the size of the hex shank, ungroup the design and change the size of the polygon, adjust the height of the polygon if you need a deeper hole.
After editing, remember to select all when you finnish the design, align centers then group all.
After printing this tool, the hole must be cleaned from the supports, and you will need to chamfer the edges to allow the shank to fit.
The shank will be hard to get it inside the hole for the first use, insert the drill bit in a piece of wood and carefully press the shank in the printed hand tool, put the shank in and out many times(you may need a tool to take the shank out), untill it makes it place and become easy to remove.
This design don't need a magnet to keep the shank.
Printer: ANYCUBIC I3 MEGA
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0,4
Infill: 100%
Notes:
Material: PLA
temperature setting for my ANYCUBIC..:
printing temperature: 230C
Build plate temperature: 60
| Date de publication | 16/04/2018 |
| Technologie | FDM |
| Complexité | Easy |
