Happy Cat Hanging Bird Feeder #Tinkerfun
Happy Cat Hanging Bird Feeder #Tinkerfun
3D
Published 2018-07-02T17:01:29+00:00
This object was made in Tinkercad. https://www.tinkercad.com/things/akAdL8t0sqi
A hanging bird feeder with the shape of a happy cat. The birdseed goes into the mouth of the cat, loosely or with the aid of peanut butter. It's a simple design, and it should print without supports if you are interested in 3D printing it. It adds a little something cute and funny to your bird feeding and watching. Printed at 100%, it is 12.3cm wide by 10.3cm long by 10cm tall. As it is, it's a good size for smaller birds, but probably not larger ones (like doves or pigeons). It can be scaled up if you'd like.
I've also added a version that does not have such a shallow angle at the top of the mouth, so it is easier for printing if your printer doesn't like overhangs. That's the Happy-Cat-Hanging-Birdfeeder-with-a-More-Printable-Mouth-Tinkerfun.stl
It was also made in tinkercad. https://www.tinkercad.com/things/bLTwhZzcjQq
#Tinkerfun
Recommended printing at 10% infill, with a 0.2mm (standard) resolution. It prints as it is, without supports. It can be scaled up or down (to about 60%). At 100% it measures 12.3cm by 10.3cm by 10cm. I used PETG filament because of how it handles the heat.
| Date de publication | 02/07/2018 |
| Durée d’impression | 570 - minutes |
| Dimensions | 123.22mm x 103.28mm x 100.71mm |
| Technologie | FDM |
| Complexité | Easy |
| Sans support | YES |