Hope3d Modular InsectHouse
Hope3d Modular InsectHouse
3D
Published 2019-03-22T15:45:40+00:00
This modular BugHouse is designed to fight back the global decline of insects! It was modeled for the #Hope3D Design competition and therefor has different parts, some easy to print on small printers (like Body1 and Body9), some more suitable for bigger printers and better quality (like Body3 and 6).
The base is made with the 5 parts, Body1,2,3,4 and 5 and fit together easily but to make sure it doesn't falls apart cause of sunlight, rain and other environment factors some glue is recommended. The roof part, Body5 has some tappered inclines so rain washes of it easily and the insectmodules stay dry.
The ButterflyModule, Body6, is designed to house different species of butterfly pupa and also doubles as an hybernating space for adult buuterflies. This Module needs to be filled with some sticks and leafs of Hedra hedra wo the eggs will be layed on them and for the pupa to hang from.
The BeeModule, Body 8, is designed with different radiuses and detpth to suited the needs for different spieces of bee's. 2 and 3mm for the genus Chelostoma, Hylaeus and Heriades. 5 and 7mm for the genus Osmia, Anthidium and Collestes. And 10 and 12mm for the genus Anthophora and some Osmia.
The LadybugModule is designed to give shelter during the summerrains and it is recommended to place this shelter near your gardenplants who needs some louse protection.
The last module can be filled with some wood, reed or coconut hair to assist in an more natural look or birdsnesting material.
Body1; can be printed laying down on an 100*100 bed
Body2; can be printed standig up, ad a brim to give it some extra surface, on an 100*100*150 bed
Body3; needs to be laying on its back, with the screwhole on the bed, this needs an 100*150 bed
Body4; see Body2
Body5; Needs to be laying on the top, with the raininclines on the bed so the nudges come out neatly. this needs an 120*120 bed *Edited to make it stick to the bed beter
Body6; Needs to be printed on its front and needs an 150*100*100 bed
Body7; can be printed on the front or back and needs an 100*50*100 bed
Body8; Needs to be printed on its back and needs an 100*50*100 bed
Body9; see Body7
| Date de publication | 22/03/2019 |
| Sans support | YES |