Jet Engine Component; Fan, Metal Blade with Snubber
Jet Engine Component; Fan, Metal Blade with Snubber
3D
Published 2019-04-18T17:52:56+00:00
I used to create models of "Wide cord composite fans" for comparison with propellers.
https://www.myminifactory.com/object/3d-print-jet-engine-component-fan-75172
This model is the Metal Fan Blade model with Snubber (Midspan shroud) that was mainstream before the birth of "Composite fans".
Some large engines with the bypass ratio of 5: 1 have this type, but this is for engines with the bypass ratio of around 1: 1.
This type was mostly made of titanium.
The following explainable elements were incorporated at this time.
① Fan Blade, Metal Blade with Snubber (Midspan Shroud)
Full Metal (Titanium) for Low Bypass Turbofan
"All (3) Blades" can be removable and assembled by finger simultaneously.
② Fan Disk (Partial)
having "Dovetail" type slots.
Download files includes;
-files: STL Files= 2 items
STL file name: "ws" of last 2 digits means "With Support" which special designed.
Purchase Parts Information;
-None
Assembly Points
- Not necessary special skill.
- All blades should be assembled simultaneously.
Total Net Print Time: Approx. 6 HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Note: When at actual print, each parameter may be adjusted by your experience.
3D printing settings
Raft, Layer Height, Infill: Depending on your experience.
My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA.
I do hope you enjoy making!!
See above.
| Date de publication | 18/04/2019 |