Maltronics Malduino Elite Snap Case
Maltronics Malduino Elite Snap Case
3D
Published 2020-05-29T12:15:21+00:00
This case is designed for the Maltronics Malduino Elite; a BadUSB device that works similarly to Hak5's USB Rubber Ducky. The main physical difference in design is that the Malduino Elite has a DIP switch on the PCB, allowing to use 16 different Ducky Scripts.
This case is a "Snap Together" design, in that once the Malduino is indexed in the DIP switch port, simply snap the bottom casing to the top. No screws, nor any adhesive is required for assembly. There is very little wiggle room, around .2mm of clearance in the CAD model, possibly .3mm irl.
The port in the rear of the case allows for easy insertion and removal of the needed MicroSD card. The port on the top casing allows for a flush fit of the DIP switch.
The case dimensions are: 3.6cm x 2.3cm x .8cm.
Hardware:
Maltronics Malduino Elite: https://maltronics.com/collections/malduinos/products/malduino-elite
Standard Print Settings:
Extruder: 207C
Bed: 56C
First Layer Print Height: .30mm
Wall Thickness: .40
Wall Perimeters: 3
| Date de publication | 29/05/2020 |
| Sans support | YES |