micro:bit connection mod
micro:bit connection mod
Published 2015-11-06T17:03:55+00:00
micro:bit connection mod
The micro:bit is designed to be connected to others devices using crocodile clips or banana wire, but sometimes you might want to use regular small wire so I designed this to enable you to do so!
It’s very simple to use & print: No support, no glue, no soldering! Enjoy! J
Parts description:
Step 1: Printing the Parts
This clip have to be printed with flexible filament, use more than 30% infill, no support. Because they are very small, you should print at least 4 of each on one print bed, with a low speed, this gives the layers time to cool as the nozzle moves between the pieces.
Step 2: Assemble the parts
Very simple to assemble together, refer to the picture below ;) When it’s done just clip it inside your micro:bit!
Now you are ready to easily link whatever you want to your micro:bit ! J
Date de publication | 06/11/2015 |
Durée d’impression | 5 - 20 minutes |
Quantité de filament | 0.2g |
Dimensions | 5*6*7 |
Technologie | FDM |
Complexité | Easy |
Sans support | YES |