Mikrotik wAP 60G Pole mount
2,744
views
114
downloads
Community Prints
Add your picture
Soyez le premier à partager une photo de l'impression de cet objet
0 comments
Loading comments...
Mikrotik wAP 60G Pole mount
3D
Published 2019-07-05T11:13:41+00:00
0
0
Add to Collection
Description
This is a pole mount for the wAP 60G devices from Mikrotik. The expected pole diameter is 25mm. To assemble this mount you need
- One M8x55 screw with hex head
- One square M8 nut
- Two M4x15 screws
- Two M4 washers
- Two M4 nuts (doesn't if square or hex)
- 2 5mm wide cable straps to secure the mount on the pole
The device is mounted with M4 screws and nuts. Simply screw the metal backplate on the mount with the M4 screws and nuts. The nuts go on the "inside" of the metal backplate. I recommend using washers on the back of the mount.
Two assemble the two parts of the mount simply put the M8 nut into the designated hole, hold the two parts together and tighten the M8 screw.
Licence
Technical Information
Date de publication | 05/07/2019 |
Durée d’impression | 4 - 45 minutes |
More Information
Object Parts