MK11 Scorpion Spear - Burning Akunin Hell Spear
MK11 Scorpion Spear - Burning Akunin Hell Spear
3D
Published 2020-11-06T06:45:12+00:00
Here is my take on MK11 Scorpion's default spear - Burning Akunin Hell Spear. This was 3d modeled in Autoddesk Fusion 360 and from scratch since the tail end of the kunai, where the ring meets the spear body has a different design. This is my interpretation on it, and I think it lends a better visual design on it.
I have uploaded both the whole spear, and the halves as well. I've included a 1mm flat extrusion from the center of the halves because I know printing it with a blade edge tends to not survive the printing process and for durablity. If enough people want it, I can also upload the version without the 1mm extrusion so the two halves and meet to create an edge.
I offer prints from my Etsy if you are unable to print it yourself: https://www.etsy.com/listing/906236554/3d-printed-scorpion-spear-from-mk11?ref=listing_published_alert
Note: this is for a costume prop only. This is not meant to be used as a weapon and can be dangerous is used improperly. Please use proper judgement - I know you will. Also, please do not repost this without crediting me or use for commerical purposes. This model is only for personal use.
Printed on my Anet A8
Half Model:
20% Infill
3 shells
0.2 layer height
| Date de publication | 06/11/2020 |
| Quantité de filament | 17gs |
| Dimensions | 193mm x 117.2mm x 12.8mm |
| Sans support | YES |