Thank you. A very easy print. This is 50% size at 0.1mm

Printed at 25% scale with a 0.25mm nozzle and 0.08mm layer height. Great model! Can't really see the strings by eye, but my macro lens always shows a lot of detail...

This is the Moon City. It was printed on 3D Mars Black filament and scaled up to about 175mm in height. Been wanting to print this for a long time and finally got around to doing so. It looks great! Thanks for the model! 0.4 nozzle 0.2 layer height 20% infill

Printed on Anycubic i3 Mega (ultrabase version), 0.2mm layer height, 15% infill at 80% scale in PLA. Print time was 8h 28m. I'm actually quite satisfied with the result. Thanks to the creator of this great, great model!

Great sculpture! Upscaled to 150%. 32hrs @ 0.2mm on my Prusa MK3

Awesome print! 0.175 layer 20% infill. AMZ3D silk gold.

Awesome print! 0.175 layer 20% infill. AMZ3D silk gold.

Awesome print! 0.175 layer 20% infill. AMZ3D silk gold.

Printed at 200 microns. Painted in geode pattern, then sprinkled inside with glitter. Made a stand by inverting the model and inserting solar panel for multicolored light. Great Valentines present :)

Printed on the new SeeMeCNC Artemis with default fine print settings for PLA. Filament is Atomic bronze.

Finished BEAUTIFULLY at 60% scale. Already on my 3 print of it for gifts, next is the full size for myself Printed on Ender 2

Great Model. Printed at 65%

Great model, our first attempt at 75%scale

Printed with Marble effect PLA on an Eaglemoss Vector 3

amazing model! this is mine!

This is mine! and I also made a timelapse video https://youtu.be/E4l7Xnlzz8U of the 13h print @ 0.2mm

150 percent scale, about 24 hours gradient filament no post-processing at all....

printed on Anet A6 0,2 Layer my second try painting a 3D Print

Printed using Polyalchemy's Elixir filament in copper colour.

Great looking model, printed in SUNLU PLA+ Silver Grey.

Love this model!

My longest print yet at 22 hours. printed at maximum build volume for my prusa at .1mm res. An awesome addition to my 1 year old's space themed nursery

Fantastic model! I printed the first one a year ago but this one is mucht better!

ornament size

0.2mm layer hight, 14h print.

Printed on 1st gen CR10 at .2mm at 210C on 60C glass with Magigoo. No stringing at all. (surprising) Used ALPTA "Gray" PLA - very good PLA that is no longer available as I write this.

Nice model

In the Christmas tree :)

Various SLA prints

One of my favorite models. Prints well without supports, and it always fascinates people when I tell them it's 3D printed. Recently revisited it and printed it using 3D Solutech marble PLA. You can see a timelapse video of the print on Instagram here: https://www.instagram.com/p/Bs6CCcfnSu2/

Step 0,2 Infil 15% Support 10%

thanks for the model.

Incredible model! I printed this to completely fill up my bed on a Creality CR-10 printer bed. It's big! I printed it using PLA Silk Copper filament.

0.2mm at 75% scale

Looks awesome. Thanks for the amazing work.

Turned out very nice! Ender 5, 60% scale, 0.12mm layer height, painted expertly.

Fantastico ender 3

Nice Model, Lots of detail.

Over 48 hours of printing on 0.15 layer height. Painted with copper metallic spray on the inside, as inspiration from some other makes. It seems that MK3/S is having some quality issues on steep overhangs, but it is in barely visible places. I recommend checking quality on curved overhangs and tweaking them before printing Moon City. Slowing down the print, tweaking, filament, temperature and cooling should make a differance. Fantastic model, thanks to Jukka Seppänen for making it!

Moon city V2 by @kijaidesign. Awesome design! Many thanks for sharing! Printed on #prusamk3 with white PLA from @dasfilament_de. #3DPrinting #lamp #mooncity #art #3ddesigningstudio #prusa

Gonna make a great bedside light for my niece! Awesome design.

Gonna make a great bedside light for my niece! Awesome design.

Awesome model thank you very much for the fabulous experience :)

Gotta love resin printers

Great Design, looks awesome. Printed with "Das Filament" in silver PLA, 0,2mm Layer, 0,4mm Nozzle. Flawless without support.

Excellent model, looks awesome. Printed with "Prusament filament" in Mystic Brown PLA, 0,2mm Layer, 0,4mm Nozzle.

3D printed with silk metallic silver on a flashforge guider II, 208 C extruder, 65C bed, 50 mm speed, super fine setting, I think 0 .12mm layer height, expanded to about 150% size, 88 hour print! Turned out awesome.

This is a fantastic model! I had to print it twice because the first time I didn't have enough layers on top and in a few spots the infill showed through.

Absolutely love the detail of this model, and glad I could print it on my Elegoo Mars. Barely 2 inches tall, it looks great in the Elegoo Clear Blue resin. It may not be big enough to insert a LED light inside, but it's a perfect print!

Very nice. Print on dagoma 200 .

The small one is my first print on my new Elegoo Mars, and the large one was as big as I could print on a Flashforge Finder. No supports, no special settings. Elegoo Water Washable Resin in Grey and Hatchbox PLA in White. Great model and fun to print! Thank you.

Merci pour cet objet qui est magnifique, imprimé en 0.15 10% 50mm/s 27 hours No problem