Multi Color Ear Savers
Multi Color Ear Savers
Published 2020-07-29T12:31:53+00:00
I started printing ear savers for my mom, which led to people at her hospital asking for some, then I started getting requests for different designs - so I created my own template to be used easier with Prusa MMU and Mosaic Palette. There is a solid model of each as well that can be printed with 1 color or can add paused layers to swap colors.
Please let me know if you have any requested designs.
I print them at 0.3mm layer height and 3 walls - since it's 1.2mm tall, 0.2mm layer height should work fine as well.
If using Canvas - drop all models from a folder (not the solid) on the multi-model half and all the pieces should drop into place.
If using Prusa Slicer - add the Bottom, then right click and "add part" for each additional part and they should all be aligned properly.
Date de publication | 29/07/2020 |
Durée d’impression | 20 - minutes |
Quantité de filament | approx 0.88 meter |
Dimensions | 160.2mm x 33.6mm x 1.2mm |
Sans support | YES |