Photography background stand


Photography background stand
Published 2018-06-19T06:12:17+00:00
Not sure how to name this object, even in Spanish (my native language) I do not know how to call it ... Well, check the pictures and you will understand everything. It is just some kind of stand to add a sheet of paper or thin cardboard in order to have a good and clean background for your pictures (do not limit your pictures to a white background, try everything you can think of). Now I do not have to worry anymore about my messy and scratched table.
I designed this object because I downloaded similar things from other sites I did not like them, I could not add three perimeters correctly. I like to work with three perimeters, this almost always allows me to print with no filling. So I designed my object to be able to print it with three perimeters (0.40mm per perimeter).
I design and share this for free but a donation is always welcome, you can't imagine how much plastic I waste making prototypes! Gracias!
I have printed mine at a layer height of 0.32, it is a very high height for a 0.4 nozzle, I do not recommend going higher. This is the only important thing to print this: depending on the layer height you use, you will need more or less bottom layers so that there are no floating parts, check twice your slicing software before print.
Date de publication | 19/06/2018 |
Sans support | YES |