Prusa i3 X-Carriage with X-endstop mount and filament chiller
Prusa i3 X-Carriage with X-endstop mount and filament chiller
3D
Published 2014-10-29T09:29:45+00:00
That's my last work, 10 hours of hard modelling ^^. What I hate a lot of Prusa i3 X Carriage is the wristbands to hold the linear bearings. I think this is a misuse of nylon and time anytime I need to dismantle my printer. So I decided to make something more "reliable". And that's it. An X-Carriage that holds those bearings with the two bolts used to fix the J-Head hotend. But because we all need to chill PLA during the printing phase I added a third component to blow the thermoplastic during extrusion with a 50mm fan. It was an hard work, due to my research to easy peasy printing, eliminating (I hope) the needs of ANY KIND of material support during the slicing phase. Haven't printed yet, so the only reason I know it should fit, is because the assembly stage in Inventor LT.Extruder Have fun and comment for changes or questions!
Print at 0.2 mm layer height, with 20 % infill. This uses 71 g of filament and takes 536 minutes.
| Date de publication | 29/10/2014 |
| Durée d’impression | 500 - 600 minutes |
| Quantité de filament | 71g |
| Dimensions | 116mm x 106mm x 129mm |
| Complexité | Medium |