Puzzled Lollipop
Puzzled Lollipop
3D
Published 2019-09-02T19:10:13+00:00
A while ago one of the viewers asked me to print a candy.
I couldn't find anything nice on Thingiverse. So I've decided to design my own lollipop.
The idea was to make 10 triangular pieces, which are easy to connect without any glue, just press fit. The easiest way to connect the pieces was to make interlocking mechanism just like in regular jigsaw puzzles. And here you have it: 3D printed Puzzled Lollipop which looks also like a pizza.
You can see how I've printed and assembled it on my youtube channel:
If you want to have two color lollipop:
print LollipopA.stl in one color and LollipopB.stl in other color.
Lollipop.stl contains all 10 pieces (9 regular and 1 with a hole for a stick). The tolerances are quite tight so use a soft head hammer to join them.
Source file included (Design Spark Mechanical zipped) so you can modify it to your liking.
Use soft head hammer to connect the pieces. First do two halves of 5 pieces and then connect the halves together. Be gentle and purposive.
Print Settings
Printer:
Anet A6 Prusified
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
15%
Filament: 3DACTIVE, Spectrum PLA Red, Green
Notes:
For up and bottom layers I've used concentric circles, so it will look better. Use three perimeters (1.2 mm wall).
| Date de publication | 02/09/2019 |
| Durée d’impression | 120 - minutes |
| Quantité de filament | 25 grams |
| Dimensions | 130x130(on the hotbed, not assembled) |
| Sans support | YES |