Rab-bot MK2 Bunny Mecha #TinkercadEaster
Rab-bot MK2 Bunny Mecha #TinkercadEaster
3D
Published 2018-04-11T10:53:12+00:00
This object was made in Tinkercad. https://www.tinkercad.com/things/06Zq5zCs83R
#TinkercadEaster
For my entry to the Tinkercad Easter competition I made an easter egg that transforms into a bunny mech. This was a super challenging design that pushed me to learn a lot of new things about 3d printing like print in place socket joints and how to make mechanical parts in tinkercad.
would recomend splitting into prints containing a single appendage at a time if your printer has any issues with thin layers warping over time. You will definitely need some super glue for this one. This print was designed for printers with sub .2mm accuracy so depending on your printer you may also want a little sand paper. ball sockets will need to be freed from their print position with some pressure. if your having trouble with them on your printer try grabbing the ball with pliers rather than putting pressure on the connector piece.
you will need to enable auto support generation in your slicer
| Date de publication | 11/04/2018 |
| Technologie | FDM |
| Complexité | Easy |