Raspberry Pi Camera V2 Articulated Mount
10,504
views
1,048
downloads
9
collections
Community Prints
Add your picture
Soyez le premier à partager une photo de l'impression de cet objet
2 comments
Loading comments...
Raspberry Pi Camera V2 Articulated Mount
3D
Published 2018-12-10T10:44:05+00:00
106
2
Add to Collection
Description
I designed this mount to hold my Octoprint camera inside my Ikea Lack enclosure for my Prusa i3 Mk3. It attaches to the corner of one of the upright legs with simple mounting tape. The swing arms are designed to move and allow the camera to swing and be pointed pretty much any direction within a 270° horizontal arc and nearly 180° vertical arc.
Some hardware is required:
- 1x M4x12 socket head cap screw (https://amzn.to/2PuYJip)
- 1x M4x25 socket head cap screw (https://amzn.to/2rpkPsQ)
- 2x M4 nut (https://amzn.to/2Uumk6o)
- 3x small 2mm outer thread diameter sheet metal or plastic screws, between 5 and 8 mm threaded length (https://amzn.to/2QizGnT)
Links to camera and tape:
- Raspberry Pi Camera v2: https://amzn.to/2PoOXhH
- 3M VHB Tape: https://amzn.to/2UzGKem
Détail de l'impression
Print Settings:
- 0.2mm layer height, 0.4mm nozzle
- 2 perimeters, 20% infill (grid or cubic recommended)
- No brim, but supports are recommended for the camera backshell
- PETG or something more durable than PLA is recommended
Technical Information
Date de publication | 10/12/2018 |
Durée d’impression | 70 - 150 minutes |
Quantité de filament | 15 grams |
Dimensions | 55mm x 60mm x 33.5mm |
More Information
Object Parts