RC Fisher Spreader
RC Fisher Spreader
Published 2019-02-18T18:12:38+00:00
I designed this RC Fisher Spreader replica to give hobbyists another scale accessory to add to their rig. The RC Fisher Spreader replica has a lot of the features the the full size one has, like tie down points, top cover, and spinner housing. This design is sized to fit on one of my other designs, the RC Flatbed. The thins sitting beside the spreader are meant to mount on the back of the spreader with superglue, and line up with the sides. The rhodes on the side of the back pieces are supposed to be facing each other. If you have any question about this design, or any of my other designs, please email me at dmsoucy03@gmail.com.
Disclaimer, this in its current state, is not fully functional, it is only partially functional.
I didn’t get to printing this design, because I ran short on time, so I can’t give that many details about it. The dimensions for the spreader are 7.875 in.(200.025mm) x 5 in.(127mm) x 4.5 in.(114.3mm). The dimensions for the cover are 6.871 in. (174.52mm) x 5 in.(127mm) x 0.703 in.(17.85mm). The dimensions for the spinner housing are 3.313 in.(84.15mm) x 3 in.(76.2mm) x 1.411 in.(35.83mm).
Date de publication | 18/02/2019 |
Dimensions | In Printing Details |
Technologie | FDM |
Complexité | Easy |
ok