Rick's Portal Gun (Pieces)
Rick's Portal Gun (Pieces)
3D
Published 2018-11-05T10:44:15+00:00
If you would like to use this in a youtube video PLEASE give feedback, print settings and of course credit with linking to this post.
Rick and Morty was (and still is) one of my favourite shows to watch on Netflix, so I decided to 3D Model Rick's hand held portal gun of which you can create in real life and probably get working with the right equipment of the following:
- Enough Cables to solder together
- 5 LED (4x Green and 1x Red/Blue)
- A Capacitor (10000uF)
- 6 x Resistors (One for the capacitor, 5 for the LEDs)
- A 9v Battery
The completed portal gun has no switch to turn the circuit on and off, but that is optional and can always be modelled into the gun itself. Please use appropriate adhesive when gluing this together :)
Ensure that you use supports for the main body as this will pretty much give you perfect print quality.
GOOD LUCK!
TO get a good quality print you do not always need to have 100% infill!
I am going to be recommending that on the main body and the handle you use 40-60% infill as a RECOMMENDATION! This way it will print the fastest and ensure maximum quality. Please be advised to get it to work properly uou'll need a bit of soldering on the main plate.
| Date de publication | 05/11/2018 |
| Durée d’impression | 1500 - minutes |
| Quantité de filament | 700g |
| Dimensions | 330~ish mm long. |
Scalable model printed with standard settings. Dimensions, time to print and material quantity refer to the object I made.