SCX10 II Jeep Cherokee Wheel Wells
SCX10 II Jeep Cherokee Wheel Wells
3D
Published 2018-10-05T12:12:09+00:00
I designed these wheel wells to try to keep the most amount of dirt, mud, snow, etc… out of my truck. These wheel wells are intended for the Axial SCX10 II Kit Cherokee, and I don’t know if they fit other vehicles or bodies. The wheel wells also add that scale feature to your rig to make it yours. You will need to use two M3 x 20mm screws to mount the shocks to the wheel wells to the shock posts. If you have any question about this design, or any of my other designs, please email me at dmsoucy03@gmail.com.
When I printed one the wheel wells the first time, it didn’t go so well. The printer I used had a small amount of filament left, which i thought was going to be enough, but turned out not to be. The second time I printed them, they turned out great. They look and perform awesomely. The dimensions for the front wheel wells are 4.322 in.(109.77mm) x 2.5 in.(63.5mm) x 2.006 in.(50.95mm) and the rear wheel wells are 5.25 in.(133.35mm) x 2.5 in.(63.5) x 2.006 in.(50.95mm). The time to print one wheel well is 4 to 5 hours, the time to print to wheel wells is 10 to 12 hours.
| Date de publication | 05/10/2018 |
| Dimensions | Time to print and Dimensions in Printing Details |
| Sans support | YES |