SCX24 Tracks!
SCX24 Tracks!
3D
Published 2021-06-28T09:10:37+00:00
Functioning tracks for the axial SCX24 crawler. I wanted to be able to drive my scx24 through softer terrain including snow and sand so I created these. See my YouTube channel Cinemoto for running videos!
You will need the following for a set of 4 tracks.
M2x8mm bolts x 40
M2X10mm Bolts x 24
2x6x3 Bearings x 40
10x15x4 Bearings x 8
PLA of your Choice
Ninjaflex TPU
Print this quantity of items for a set of 4 tracks.
Caster x 16
Caster Spacer x 8
Small Runner x 32
Large Runner x 8
Chassis Cap Outer x 4
Chassis Cap Inner Rear x 2
Chassis Cap Inner Front x 1
Chassis Cap Inner Front MIRRORED x 1
Chassis Rear x 1
Chassis Rear MIRRORED x 1
Chassis Front x 1
Chassis Front MIRRORED x 1
Main Cog x 4
Nut Driver x 1
Track Extreme Terrain x 4 *
*Print in Ninjaflex TPU
All PLA Items:
.4 Nozzle
.2 Layer Height
100% infill on all parts except chassis I printed chassis at 20% infill to reduce weight.
Use supports when needed.
For the tracks print those in ninjaflex with the following settings.
.3 Nozzle
.2 layer height
0 top layers
0 bottom layers
Wall line count of 3
| Date de publication | 28/06/2021 |
Using Cura, i have the same results.