Shower Shaver Holder
Shower Shaver Holder
Published 2021-01-11T12:01:24+00:00
A simple, customizable shaver holder that attaches to a shower pole.
As usual, this is a fully customizable design.
It can be customized for many different shower pole and shaver sizes. You can also choose whether you'd like it to hold one or two shavers.
This design is completely free and shared under a permissive license. Your support is hugely appreciated.
Did you know?
Some of our designs cannot be found on MyMiniFactory. If you are looking for more, check out our premium projects:
https://codeandmake.com/premium
Customizer
You must use OpenSCAD 2019.05 or later with the .scad file included in this project, as it uses features that were introduced in this version.
OpenSCAD Customizer Options
This design has the following Customizer options:
Material
- `Material_Thickness` - Thickness of the material
- `Material_Height` - Height of the material
Pole
- `Pole_Diameter` - The diameter of the pole
- `Pole_Gap_Angle` - The angle of the gap
Hook
- `Hook_Gap` - Width of the gap between the hooks
- `Curved_Hook_Gap` - Curve the gap between the hooks
- `Hook_Straight_length` - Length of the straight section of the
- `Hook_End_Curve_Radius` - Radius of the end curve
- `Hook_End_Curve_Angle` - Angle of the end curve
Dual Hooks
- `Dual_Hooks` - Add a second hook
- `Dual_Hooks_Offset_Angle` - Offset angle of the hooks
Design Considerations
For the best grip, we recommend choosing a `Pole_Diameter` value that is slightly smaller than the actual diameter of your shower pole. For example, if you shower pole diameter measures 22mm, try a `Pole_Diameter` value of '21'.
Material
We recommend printing this holder in ABS filament for extra durability.
Versions
- 1.0 (5 Dec 2020) - Initial version
Printing
Recommended slicer settings:
- Resolution: 0.1mm - 0.2mm
- Infill: 20% - 100% depending how durable you'd like it to be.
- Supports: Yes, if the hook end is curved (`Hook_End_Curve_Angle`)
- Rafts: No, unless you have adhesion issues.
Links
License
The "Shower Shaver Holder" models (.stl) are licensed under the CC BY license by Code and Make.
The "Shower Shaver Holder" code (.scad) is licensed under The MIT License by Code and Make.
Please note: The CC-BY license has been selected on MyMiniFactory because MyMiniFactory's list of licenses does not include MIT.
We are proud to offer content to you absolutely free.
We love to create free content for you. As you might imagine, it takes a lot of time. Supporters help us fund materials and equipment to create future projects and tutorials. To show your appreciation, please use the link below:
https://codeandmake.com/support
We thank you so much for your support!
Date de publication | 11/01/2021 |