Shrine of Chance Risk of Rain 2 Fan Art
Shrine of Chance Risk of Rain 2 Fan Art
3D
Published 2020-05-26T15:59:12+00:00
A great stone statue built by locals of the alien planet featured in the Risk of Rain game franchise, certainly one of my all time favorite games. I affectionately refer to them as a "Shrine of Disappointment".
Modeled for 28mm size, perfectly proportioned for tabletop RPG terrain.
Not too crazily detailed, made for easy desktop FDM printing.
Very paintable, just spraypaint in black and go to town with standard model paints. Remember, thin your paints!
Printer: Creality Ender 3
Material: PLA
Rafts: No
Supports: No
Layer Height: 0.12mm
Infill: 35% Gyroid
Slicer: Cura 4.4
Nozzle: 0.4mm
Speed: 40mm/s
Line Count: 3
Top Layers: 7
Bottom Layers: 5
Ext. Temp: 195°C
Bed Temp: 60°C
Retraction Distance: 7 mm
Retraction Speed: 50mm/s
Software Used: Blender 2.8
Having Some Issues?
A well-calibrated printer is key to really nice print quality. Try the following by looking up some tutorials:
- Calibrate E-Steps
- Calibrate X, Y, Z Motor Steps
- Calibrate Flow Rate (aka "Extrusion Multiplier")
- Re-level Build Plate
- Dial in filament temperature
- Toast filament with a dehydrator
- Slow down print speed
| Date de publication | 26/05/2020 |
| Durée d’impression | 60 - 240 minutes |
| Quantité de filament | 40 grams |
| Dimensions | 41.8mm x 41.8mm x 78.4mm |
| Sans support | YES |
