Small parts case (large) V2 w. 8 different box types
Small parts case (large) V2 w. 8 different box types
3D
Published 2020-04-03T11:40:10+00:00
This is a small parts tray with a large variation of boxes so that you waste as little space as possible.
Tray size: 24cm x 19.5 cm. This means your print bed needs to be at least 24.5 x 20 cm large. Otherwise you cannot print with a brim.
There are a variety of boxes included. The naming for the boxes assumes that the width of the half-tray (left/right side of the central barrier) is equal to 1.
- Full-height box, widths 1, 1/2, 1/3rd
- Half-height box, width 1/2
- 2/3rd height box, widths: 2/3rds, 1/3rd
- 1/3rd height box, widths 2/3rd, 1/2.
So 8 different sizes in other words. Please refer to the photo
I used a Prusa MK3S with Verbatim PLA to print this.
Print the tray with a brim. Make sure you have a stable temperature around the printer. If the base detaches from the bed too much, there is a risk that the boxes become a bit squeezed in the tray. This can be later compensated by using smaller boxes as they introduce more space between boxes.
| Date de publication | 03/04/2020 |
| Dimensions | 24cm x 19.5 cm x 3.8cm |
| Sans support | YES |