Small Shelf Stands
Small Shelf Stands
3D
Published 2020-10-29T21:15:24+00:00
I designed these easy-to-print shelf stands for my wife's snowglobe collection. Our shelf to display them has a lip in front, so these little pedestals raise them to the perfect heights. One is 50mm x 50mm x 17mm and the other one is 40mm x 40mm x 15mm. I originally designed these to be strong while not using a lot of resin, but I have since bought a filament printer which works much better for this idea.
After printing a few out in filament, it looks like the 40mm stand could use thicker legs. The legs snapped off while "testing" them (bending the posts until they break). Though, the little guy is still strong enough to hold up a full pint of alcohol!
Thanks for looking!
Resin Estimates
50mm = 8.868 mL / 56 minutes to print
40mm = 3.694 mL / 1 hour 3 minutes to print
Filament Estimates:
50mm = 10g (3.23m) / 1 hour 15 minutes to print
40mm = 5g (1.55m) / 40 minutes to print
Printer:
Anycubic Photon Mono 2K
Anycubic Mega Pro
Resin Settings:
Bottom Layers - 4 - 25s Exposure Time
Normal Layer - 3.0s Exposure time
PLA Settings:
Coming soon!
| Date de publication | 29/10/2020 |
| Durée d’impression | 40 - 75 minutes |
| Quantité de filament | 9 mL |
| Dimensions | 50 x 50 x 17 |
| Sans support | YES |