Sock Assist
Sock Assist
3D
Published 2018-10-23T01:12:10+00:00
This object is designed to be an assistive aid for putting on socks that share a similar concept to the one I have here cost $10-$30 (See this website for commercial sock aids https://www.arthritissupplies.com/search.asp?keyword=sock&search=). The design I made can be printed for under $5 ($4.24 for just matieral cost) when printed carefully (proper supports and infill). There are quite a few different concepts of sock assisits out there, here I made one that was 3D printable, did not require other material and is durable as well as cheap. Athough the aid works, it is better used on carpet so it doesn't slide around while trying to put the sock on.
The design can be improved to help steady the aid while in use I had larger plans but ran out of time. I printed this aid in PLA with an infill of 50%. To fit my printer I printed the disign at 90% scale size but the full scale verson is comparable to current designs on the market.
The slicer program I used was Cura.
Support is used to print this design and I also sanded down parts the print after removing the supports.
Cura Support Settings (this is what worked best for me and my RepRap printer):
Support over hang angle: 57 degrees
Support Pattern: ZigZag
Support Density: 12%
Support Z Distance: 0.2
Support X/Y Distance: 0.8
NO Support Roof
| Date de publication | 23/10/2018 |
| Quantité de filament | 212 Grams |
