SOS = Strong + Optimized + Simply - Special Spool Holder for Joel
SOS = Strong + Optimized + Simply - Special Spool Holder for Joel
Published 2018-08-20T18:14:06+00:00
Hello, this is my contribution at this Challenge !!!
SOS :
I wanted to make something very Strong,
Optimized (plastic quantity, size of most actually 3D printers and time needed to print it)
and the most Simply design (for printing, assembly, use and storage it).
SOS, because Joel wanted us to help him ;-)
The design is optimized for a 0.4mm nozzle size (so, it's good for 0.3mm to 0.5mm nozzles) . If I win, I 'll give the original Fusion 360 files to Joel from 3D Nerd Printing :-))
Like a designer, I have respecting the specifications that Joel wanted, and here is the result of my brainstorms...
You have just to remove the brim if needed, and eventually glue the two parts together (I recommand bi-composant glue, but, it's as you prefer ! )
I hope, he will appreciate my work ;-)
@MatterHackers @MyMiniFactory @3DPrintingNerd
For a Velleman K8400 Vertex :
No supports
No raft
Brim : 8mm (only for securise the print and for not spending time and materials)
2 shells
Nozzle 0.3 to 0.5 mm
layer size : 0.2mm high
Top and Bottom layers : 3 layers (=0.6mm)
Infill : 33 pc
PLA : 212 °C
Date de publication | 20/08/2018 |
Durée d’impression | 300 - 360 minutes |
Quantité de filament | 35 grams |
Dimensions | 150mm x 90mm x 30mm |
Technologie | FDM |
Complexité | Easy |
Sans support | YES |