Soundbar Mounting Bracket
Soundbar Mounting Bracket
3D
Published 2020-04-21T19:43:56+00:00
This is a soundbar bracket I designed to replace missing brackets for my LG SH7B soundbar. These are simple shelves that you mount at a variable distance apart to support your soundbar. It has a small lip on the front to prevent the soundbar from falling off. This will likely work for many different soundbars as it only attaches to the wall, the soundbar simply rests on top.
This is my first 3D design so I likely overbuilt it but it works great and very sturdy!
***I highly recommend printing in PETG or something with better stress tolerance than PLA. My first attempt in PLA eventually started to SAG some due to the weight stress.***
The screw holes are counterbored and 38mm apart at the center. I used small screws into wall anchors. Screw width is 4mm (hole width is 4mm) and 30mm long.
It measures 100mm wide, sticks out 133mm (probably supports soundbars up to this depth, but leave room for the cables!), and is 48mm tall at the back.
| Date de publication | 21/04/2020 |
| Durée d’impression | 450 - 451 minutes |
| Quantité de filament | 65 grams |
| Dimensions | 100 mm x 133 mm x 48 mm |
| Sans support | YES |
