Spiral Twin Vase
Spiral Twin Vase
3D
Published 2019-02-15T12:45:08+00:00
New! Zero-gap version! See printing tips, below...
You might also like these free designs!
* Folio Vase: https://www.myminifactory.com/object/3d-print-84927
* Zephyr Vase: https://www.myminifactory.com/object/3d-print-81577
* Cog Bowl: https://www.myminifactory.com/object/3d-print-75430
* Groover Vase: https://www.myminifactory.com/object/3d-print-75113
* Classical Vase: https://www.myminifactory.com/object/3d-print-81753
* Lattice Bowl: https://www.myminifactory.com/object/3d-print-53755
* Blade Vase: https://www.myminifactory.com/object/3d-print-78571
* Gothic Goblet: https://www.myminifactory.com/object/3d-print-73249
* Fan Parabola Vase: https://www.myminifactory.com/object/3d-print-73432
* Clover Vase: https://www.myminifactory.com/object/3d-print-71567
* Chunky Ring Vase: https://www.myminifactory.com/object/3d-print-77170
* Tendril Vase: https://www.myminifactory.com/object/3d-print-51873
* Jigsaw Vase: https://www.myminifactory.com/object/3d-print-50426
* Lace-up Tiled Vase: https://www.myminifactory.com/object/3d-print-45183
* Paintpot Planter: https://www.myminifactory.com/object/3d-print-40901
* Rustic Star Vase: https://www.myminifactory.com/object/3d-print-73918
* Quadratic Vase: https://www.myminifactory.com/object/3d-print-73047
* Pumpkin Jigsaw Vase: https://www.myminifactory.com/object/3d-print-72744
* Pinstriped Table Vase: https://www.myminifactory.com/object/3d-print-71432
And this premium design:
* Relic Vase: https://www.myminifactory.com/object/3d-print-79349
If you're wondering why I like vases so much, check out this video!
(don't forget to subscribe!)
* Vase Mode is Great!: https://youtu.be/tba6KHk4qRk
I'd been meaning to make this design for a long time! Simple concept, just a twisted slice up the middle to account for the tolerance between the two printed halves. And it worked pretty well!
Enjoy!
New! A second version of the model has been added, and has no allowance for spacing between the two halves. And, it seems things print just fine and fit together, but that may not be the case with all printers, as tolerances do vary, so the original remains as-is. The reason for the inclusion is to facilitate scaling to larger sizes without the consequence of also scaling the tolerance factor.
Note: the "reuploaded" zero gap model is the same as the regular zero gap model - it's only there because some people were reporting 404 errors off the original file, and this was an easy fix :P
This is a vase mode print, so you'll want to enable that in your slicer! And, obviously, you'll need to print two of the things, and twist them together :)
| Date de publication | 15/02/2019 |
Great model.